Author: Formica-CZ | October 2026
Kleinwächter printing house has expanded its technological equipment with the DUPLO DSM-1000 automatic die-cutting machine. This is the first installation of this equipment not only in the Czech Republic, but also in the entire Central European region. The new technology will help the printing house speed up production, increase its safety and expand the possibilities of processing orders up to B2 format.
A family-owned printing house with over thirty years of tradition
The Kleinwächter printing house is a family company from Frýdek-Místek, whose history dates back to 1991. From the original team of enthusiasts, it has gradually developed into a modern printing centre that combines traditional printing craft with contemporary technologies.
Today, it offers services ranging from graphic design to offset and digital printing to comprehensive finishing and bookbinding. It handles orders ranging from individual author's prints and personalized printed matter to larger runs of books, magazines, catalogues, municipal newsletters, or corporate materials.
A long-term part of the company's development is investing in technologies that allow it to respond flexibly to changing customer requirements. The acquisition of a new automatic die-cutting machine DUPLO DSM-1000 also fits into this direction.
The sector under increasing time pressure
Today, printers face increasing pressure to shorten deadlines, efficiently produce smaller runs, and quickly repeat orders. Cutting can be one of the most time- and personnel-intensive parts of finishing.
The Kleinwächter printing house had previously also provided die-cutting work using older equipment. However, their operation required experienced operators and, in view of current requirements, no longer offered an adequate level of automation or safety.
The new technology was therefore supposed to meet several important requirements: speed up production, especially for repeat orders, simplify operation, gradually replace older machines, and at the same time expand the maximum processed format up to B2.
The solution was the DUPLO DSM-1000 – Duplo's first automatic B2 die-cutting machine.
The first DUPLO DSM-1000 in Central Europe
The installation at the Kleinwächter Printing House represents a significant milestone. It is the first DUPLO DSM-1000 installed not only in the Czech Republic, but in the entire Central European region.
The machine is designed for automated cutting of small and medium-sized series, where fast preparation, high accuracy and the ability to economically process orders with frequent changes are crucial.
The DUPLO DSM-1000 works with classic die-cutting dies and allows you to perform die-cutting, creasing, perforation and trimming. It processes sheets up to a maximum format of 530×750 mm and materials up to a weight of 600 g/m². The maximum die-cutting pressure reaches 40 tons.
With a capacity of up to 3,000 B2 sheets per hour, it can significantly speed up production, especially for repeat orders, where the quick preparation of saved settings is also beneficial.
Automation shortens order preparation
One of the main advantages of the machine is its high level of automation. Setup is done via a PC controller and preparing a new job can take approximately five minutes. The machine is designed to be intuitive to operate and does not require long training for a specialised worker.
An optional separation unit automates the separation of finished products from internal and external waste, reducing manual intervention and allowing operators to focus on process control and preparing for future orders.
When processing digitally printed sheets, cameras that scan license plates help to compensate for any deviations in image position and maintain cutting accuracy.
The DSM-1000 also offers a sequential die-cutting mode, where the machine can perform up to three die cycles on a single sheet with the same die. This allows for the efficient use of smaller die sets, better sheet utilization, and in some cases, reduced die manufacturing costs.
New options for packaging and shaped printed matter
The DUPLO DSM-1000 opens up additional possibilities for the Kleinwächter Printing House in the field of production of packaging, folders, presentation folders, greeting cards, envelopes, shaped printed matter or POS and POP materials.
A significant opportunity is presented by the production of packaging in small and medium runs. This is where there is a need to combine high-quality cutting with fast preparation and economical processing of a series that might not be efficient on traditional production equipment.
The new technology will allow the printer to respond more flexibly to the demand for shorter runs, original shapes, and packaging solutions with higher added value.

Jan Kleinwächter: We expected speed, safety and a larger format from the new machine
We spoke with Jan Kleinwächter, director of the Kleinwächter Printing House , about the reasons for the investment and first experiences with the new technology.
What were the main reasons for purchasing the DUPLO DSM-1000 machine?
“There were several reasons. The pressure on production deadlines is increasing, and we expect the DSM-1000 to significantly speed things up, especially for repeat orders.
At the same time, we want to gradually phase out the production of die cuts on older machines. Their operation is more demanding, and the new machine also means a higher level of safety for us.
An important reason was also the possibility of enlarging the processed format up to B2.”
How has purchasing the DUPLO DSM-1000 helped you?
"The production of die-cuts has become simpler for us and has also become significantly faster for repeat orders. At the same time, new possibilities are opening up for us in the area of packaging produced in small and medium runs."
Our experience to date meets our expectations – from ease of operation to accuracy and quality of cutting to speed of production.”
Technology ready for a changing market
The installation of the DUPLO DSM-1000 shows how the requirements for finishing are changing. The increasing number of smaller orders, shorter production times and the demand for original packaging are increasing the importance of technologies that combine automation, fast setup and high accuracy.
For Kleinwächter Printing House, the new machine not only replaces some of its older equipment, but above all, it represents another step in the development of production. It brings simpler and safer processing of die cuts, higher performance for repeat orders, and new opportunities in the packaging and shaped printed matter segment.
The first DUPLO DSM-1000 in Central Europe is entering operation with a specific task: to help the printer produce faster, safer and in a larger format - and at the same time open up space for orders that could not previously be processed as efficiently.